Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arvada?
Most garage door work in Arvada runs $150 – $600, which covers the everyday repairs we handle: springs, cables, rollers, tracks and opener fixes. A single spring replacement typically costs $180 – $340, a cable repair $130 – $250, and an opener repair $120 – $320. A full new door installation is a bigger project at $700 – $2200, and an opener installation lands at $250 – $550. Those are typical estimated ranges for 2026; the written estimate we hand you sets the final price.
Garage doors are the only thing we do, so every dollar in that table is built on garage door work and not general handyman jobs. Our technicians have up to 14 years of experience, and our estimates are free. If your door is stuck open right now, or a spring snapped this morning, call (833) 968-4997 and we’ll get you a same-day diagnosis and a clear number before any work starts.
Key Takeaways
- Typical garage door repair in Arvada: $150 – $600.
- Spring repair is priced per spring at $180 – $340. A matched pair usually gets replaced together, so a pair runs about double that range.
- Opener repair: $120 – $320. Opener installation: $250 – $550.
- New door installation: $700 – $2200 depending on door type, size and what has to come out first.
- Free estimates, and the written estimate is the price.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down by job type. Use it to get a rough sense of where your situation sits before you call.
| Job | Typical Estimated Range | Notes |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Covers most single-issue repairs; multi-issue jobs land higher in the range |
| Spring repair (one spring) | $180 – $340 | A matched pair costs about twice this range, since both usually get replaced together |
| Cable repair | $130 – $250 | Per side; cables carry the door’s weight alongside the springs |
| Opener repair | $120 – $320 | Diagnostics, sensors, boards, motor issues |
| Opener installation | $250 – $550 | Belt, chain or screw drive; smart-home and myQ-capable models at the top |
| Panel replacement | $250 – $500 | Single-section replacement; color and profile matching affects the number |
| Track realignment | $120 – $240 | Includes the rollers and hinges that usually go with it |
| Roller replacement | $110 – $220 | Nylon vs. steel rollers; all rollers on the door |
| New door installation | $700 – $2200 | Depends on door size, material, insulation and opener pairing |
What pushes a job toward the top of a range? Rusted or seized hardware that has to be cut out, a door that’s been out of alignment long enough to wear the tracks, or a second problem you didn’t know about until the door came apart. What keeps it toward the bottom? A single clearly diagnosed issue, a standard door size, and hardware that comes apart cleanly. We quote before we open the toolbox so you know which end of the range you’re in. When a job needs parts most shops have to order, our direct parts availability across the eight major brands usually shortens the wait.
One thing to plan for: springs are the single most common failure we see, and they’re priced per spring, not per door. A door with two springs that both let go is two springs of labor and parts. That’s not an upsell; it’s just how the math works. Ask us to explain it if the number on the estimate surprises you.
What Affects Garage Door Pricing in Arvada
Arvada pricing isn’t the same as pricing anywhere else, and a lot of that comes down to the housing stock and the weather. The metro area’s clay-heavy soil shifts with the seasons, which nudges foundations and, over time, door openings and tracks along with them. Add a climate that swings from hot summer afternoons to hard winter freezes, and you get doors that work harder here than most homeowners realize. Here’s what moves the number:
- Door type and size. A standard single-car door in a ranch-style Arvada home is a different job than a wide two-car door on a newer build out toward Candelas or Leyden Rock. Two-car and oversized doors carry more weight, which means heavier springs and more hardware. That shows up directly in the estimate.
- Spring type and number. Torsion springs (mounted on a bar above the door) and extension springs (along the sides) are different jobs with different labor. Most modern Arvada doors run torsion. If your door has two springs, replacing the pair costs roughly double the single-spring range, and we’ll explain why replacing both at once is usually the right call rather than coming back in a month for the second one.
- Age of the door and hardware. Doors on the older housing around Olde Town and the neighborhoods just off Wadsworth often have hardware that’s been through a lot of freeze-thaw cycles. Rollers, hinges and cables that are seized or rusted take longer to work with, and that’s labor time.
- Brand and part availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, and we keep parts for the most widely owned residential brands on hand. That cuts the “we’ll have to order that” delays that smaller shops run into. If your opener is a classic Craftsman or a wi-fi-enabled LiftMaster with myQ, we’re set up for both.
- Opener age and type. A belt-drive opener with a bad logic board is a different repair than a chain-drive unit with a stripped gear. Smart openers with battery backup and camera features take more diagnosis time, and that’s reflected in the range.
- Whether it’s a repair or a replacement. A door with one failed hinge is a repair. A door whose panels are dented, whose tracks are bent, and whose springs are shot is often a case where replacement pencils out better. The honest answer depends on the specific door, and we’ll tell you which one we’d choose if it were our own.
Permits aren’t part of a typical repair, and installing a new door usually doesn’t require one, but it’s always worth a quick call to the City of Arvada’s building department to confirm for your specific project. We’d rather you check than assume.
Repair or Replace? How the Numbers Compare in Arvada
A repair usually makes sense when the door’s structure is sound: panels straight, tracks true, and the problem is springs, cables, rollers or the opener. Those repairs sit in the $110 – $600 band and put you back in working order today. Replacement starts around $700 and climbs toward $2200, and it’s the better call when the door is dented in several panels, the tracks are bent past realigning, or a string of repairs is stacking up year after year.
A rough rule of thumb: if a repair costs more than half of what a new door would, and the door is showing other wear, replacement is usually the smarter spend. That’s a guideline, not a rule, and the only way to know is to have a technician look at the door. We’ll give you both numbers and let you decide. No pressure either way.
How to Save on Garage Door Costs in Arvada
There’s no secret discount code, but there are real ways to keep the number down. Most of them come down to catching small problems before they turn into big ones and being clear about what you actually need.
- Fix the spring before it takes the cables with it. A tired spring puts extra strain on the cables, the opener and the door’s hinges. A $180 – $340 spring repair now can head off a bigger bill later. That’s the most common money-saving move we see.
- Replace both springs at once when the door has a pair. It sounds counterintuitive to spend more up front, but two springs installed in the same visit is more economical than two separate visits, and it avoids the door sitting dead a second time.
- Get a written estimate before the work starts. The estimate should break out parts and labor. That’s how you compare quotes honestly. Our estimates are free, so there’s no reason to skip this step. Call (833) 968-4997.
- Don’t replace a door for a repair-sized problem. A lot of quotes we see from general handymen push replacement when a track realignment and a roller swap would’ve solved it. Garage doors are the only thing we do, so our recommendation isn’t skewed by wanting to sell you a door.
- Match the opener to the door. If you’re installing a new door, pairing it with the right opener at the same time saves the cost of a separate opener installation visit later ($250 – $550 if done alone).
- Keep the hardware moving. A little lubricant on the rollers, hinges and springs a couple of times a year makes hardware last longer and cuts down on the seized-part labor that bumps estimates toward the top of a range.
Saving money here isn’t about finding the cheapest quote. It’s about getting the right job done once. A $120 repair that fixes the actual problem beats a $90 repair that misses it.
Why a Garage Door Specialist Changes the Price Conversation
There’s a difference between a general handyman and a shop that does garage doors every day, and it shows up in the estimate. A generalist has to figure out torsion springs and opener logic boards on the clock. A specialist has done those jobs enough times that the diagnosis goes faster, and faster diagnosis means you’re not paying for somebody else’s learning curve.
We work across eight major brands, which means we’re not going to tell you your Clopay door or Raynor opener is “a brand we don’t touch.” That happens more than you’d think with single-brand dealers. If you’re looking for a broader picture of how we approach repairs, take a look at garage door repair in Lakewood and the surrounding area, and you’ll see how we scope jobs and what we charge for.
Parts availability matters too. The “we’ll have to order that, come back next week” delay is real, and it costs you another day with a door that won’t close. Keeping parts for the most common residential brands on hand keeps more jobs in the same-visit column.
A Word on Spring Safety
Torsion springs are under serious tension, and cables are under the same load. A spring that lets go under the wrong conditions can cause serious injury, and the tools to handle it safely aren’t in a typical homeowner’s garage. This is a job for a trained technician. We mention it because we’d rather you not try it yourself and end up in the ER than save a couple hundred dollars on a spring you could have had us replace. If a spring has snapped or your door won’t lift, leave it closed and call us.
FAQs – Garage Door Cost in Arvada
How much does garage door repair cost in Arvada?
Most garage door repairs in Arvada run $150 – $600. That covers spring replacements, cable repairs, roller and track work, and opener fixes. The exact number depends on which parts are involved and how much labor the job takes. Call (833) 968-4997 for a free estimate; we’ll tell you where your job lands before we start.
How much does a new garage door cost in Arvada?
A new garage door installed in Arvada typically runs $700 – $2200. Door size, material (steel vs. wood), insulation level, and whether the old door needs to come out and be hauled away all affect where you land in that range. Pairing the new door with an opener at the same time runs $250 – $550 for the opener install. Call (833) 968-4997 for a written estimate.
Is it cheaper to repair or replace a garage door?
Repair is cheaper in most cases, usually $150 – $600 versus $700 – $2200 for a full replacement. Repair makes sense when the door’s structure is sound and the problem is mechanical: springs, cables, rollers, tracks or the opener. Replacement makes more sense when panels are dented across the door, tracks are bent past realigning, or several repairs have stacked up in a short span. We’ll give you both numbers and let you pick. Call (833) 968-4997 to get the comparison.
How much does spring repair cost in Arvada, and do I need both springs?
Spring repair in Arvada runs $180 – $340 for one spring. If your door has a matched pair, both usually get replaced together, so a pair costs about twice that range. Replacing both at once is more economical than two separate visits, and it keeps you from dealing with a second snapped spring soon after the first. Call (833) 968-4997 for a free estimate on your specific door.
Can you come out today?
In most cases, yes. We offer same-day diagnosis for garage doors in Arvada and dispatch runs from 7am to 7pm. If your door is stuck open, won’t close, or a spring has snapped, call first thing and we’ll work you in. To get scheduled, call (833) 968-4997.
Why does the price vary so much between quotes?
Two quotes can differ a lot because they may cover different work. One may be for a single spring, the other for a full spring set with new cables. One may include new rollers and a track realignment, the other just the repair. Ask each shop to itemize parts and labor so you’re comparing apples to apples. Our estimates are free and itemized, and the written estimate is the price. Call (833) 968-4997 to get one.
Get Your Free Estimate
Garage door pricing in Arvada is a moving target without a solid diagnosis, and nobody can give you an accurate number over the phone without knowing what’s actually broken. The fastest way to get a real figure is to have a technician look at it. We work on the brand you already own, whatever it is: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman or Raynor. Give us a call at (833) 968-4997 and we’ll set up a free estimate, get you a same-day diagnosis where possible, and have your door back in working order as fast as the parts and the job allow.
Written by the team at Garage Door Repair Lakewood Pros.
Pricing reflects the Arvada market as of 2026. Garage Door Repair Lakewood Pros offers free estimates – call (833) 968-4997.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Katie Kowalski"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Lucia Ramirez"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Colleen Sullivan