Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Lakewood Homeowners
A broken garage door spring usually announces itself with a loud snap from the garage, and then the door won’t lift. Sometimes it comes down hard and won’t go back up. Either way, your car is stuck and the largest moving part of your house has stopped working. Garage door spring repair in Lakewood typically costs $180 – $340 for a single spring, and the local pro we connect you with can often get to a diagnosis the same day. Our technicians have up to 14 years of experience with torsion and extension springs, and they treat this as a core job, not an add-on. Springs sit under serious tension, so this is work for a trained technician. Call (833) 968-4997 for a free estimate, and the price is quoted and agreed before any work starts.
- Typical cost: $180 – $340 per spring, with a matched pair running about twice that.
- Same-day diagnosis is common because springs are the job we handle most.
- Upfront pricing: you approve the written estimate before anything is touched.
- Cross-brand knowledge: the pro works on the brand you already own, from LiftMaster hardware to Chamberlain openers.
What Our Garage Door Spring Repair Service Includes
Springs are the counterweight that lets a door weighing a couple hundred pounds lift with one hand. When one fails, the whole system is out of balance, and the opener starts straining to do work it was never meant to do alone. Here’s what a proper spring job covers.
Torsion Spring Replacement
A torsion spring is the horizontal coil mounted above the door on a metal shaft, and it does the lifting through a cable drum at each end. You need replacement when the coil snaps, the door feels impossibly heavy, or you hear the telltale bang from the garage. The local pro we connect you with measures the old spring, matches the wire gauge and cycle life, winds the new one to the right tension, and checks balance before finishing.
Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. They’re common on older Lakewood homes and lighter single-car doors. When one breaks, the door can hang crooked and the paired spring takes on double the load, so both are usually replaced together. The pro replaces the pair and confirms the door opens and closes evenly.
Broken Spring Repair
Break repair starts with figuring out which spring failed and why, because a snapped coil can point to a tired second spring or a door that’s been out of balance for a while. The pro checks both springs, the cables, and the opener’s lift force before recommending a fix. If only the broken spring is replaced, the older one often fails soon after, so the estimate will tell you plainly which approach makes sense for your door.
Spring Adjustment
Springs don’t always break; sometimes they just lose tension, and the door gets heavy, jerky, or stops opening all the way. An adjustment re-winds the spring to the correct setting and re-checks door balance so the opener isn’t fighting gravity. This is also the right service when a door has been re-hung or had a new opener installed and needs its springs dialed in to match.
Safety Cable Installation
Safety cables run through the center of extension springs so that when one snaps, the spring can’t fly loose across the garage. If you have extension springs and no cables, or the cables look frayed or rusted, they need attention. The pro threads new cables through the springs and secures both ends to the track brackets, which is a small job that makes the whole assembly safer.
Spring Inspection
An inspection checks the springs, cables, drums, and opener together to catch a failing coil before it leaves you stranded. The pro looks for gaps in the coil, rust at the winding cones, and uneven tension on a matched pair. This is worth doing if your door has gotten sluggish or noisy, or if you simply don’t know the last time anyone looked at the springs.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
Springs come down to wire gauge and door weight, but the hardware around them varies by maker, and knowing where each brand wears out saves time on the job. Clopay doors show up on a lot of Lakewood homes, and their spring setups are straightforward once you know the door’s weight and size. On the opener side, we service LiftMaster and Chamberlain units, including the myQ smart platforms, and we know how each one reacts when a spring fails and the opener starts working too hard. A wi-fi-enabled LiftMaster and a classic Craftsman both tell you something’s wrong through the same heavy, stalling symptoms, and the fix on the spring end is the same.
Genie openers are common on older doors, and their lift-force settings are worth checking once the springs are replaced so the opener isn’t left running hot. By covering eight major brands, we can help whether you have LiftMaster, Chamberlain, Genie, Clopay, or any other make. The pro works on the brand you already own rather than pushing a swap, and because parts for the most widely-owned residential brands are typically on hand, there’s less of the “we have to order that” delay that smaller shops run into. Whether your opener is a classic Craftsman or a wi-fi-enabled LiftMaster, we can help.
Signs You Need Garage Door Spring Repair Right Now
Springs rarely fail with a slow warning. Most of the time the door works one morning and doesn’t the next. These are the signs to act on.
- A loud snap from the garage. That bang is usually a spring breaking, and the door may already be stuck. Don’t force it with the opener, because the motor will strain against a door it can’t lift safely.
- The door feels extremely heavy. A door that needs two hands to lift by the manual release is a sign the spring has lost tension or snapped. If it’s that heavy, leave the door down and call a technician.
- The door comes down fast or slams. A door that drops instead of easing closed means the spring isn’t counterbalancing the weight. This is a real safety problem and worth a same-day call.
- A visible gap in the coil. A clean break in a torsion spring is easy to spot above the door. Once a coil is broken, the door is running on one spring at best, so it needs service.
- The door opens crooked or the opener struggles. Uneven lifting or a motor that grinds and reverses points to one bad spring out of a pair. Catching it early can save the second spring and the opener too.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis and scheduling. We ask what the door is doing, whether you heard a snap, and what kind of springs you have so the pro arrives ready. You’ll get a free estimate and an agreed price before anything starts.
- 2
On-site inspection. The pro checks both springs, the cables, drums, and the opener’s lift force, then confirms the door’s weight and balance. This tells us whether you need one spring or a matched pair.
- 3
Written estimate before work. You get a clear itemized price with the parts and labor spelled out, and nothing proceeds until you approve it. This is where the reader’s biggest worry – an invoice bigger than the quote – gets settled up front.
- 4
Careful replacement. The pro winds down the old spring tension, installs the new spring, sets it to the correct tension, and replaces any worn cables or safety cables. Torsion work is done with proper winding bars, and nothing is left under load that shouldn’t be.
- 5
Balance and safety test. The door is cycled and checked for smooth, even travel, and the opener’s force and travel limits are reset to match the new springs. You get a walk-through of what was done before the pro leaves.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Lakewood?
Garage door spring repair in Lakewood typically runs $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair costs about twice that. That range covers the common scenarios: a single broken torsion spring, a pair of extension springs, and the adjustment or safety cable work that often comes with them. A broken spring repair at the low end of the range reflects a single spring on a standard door, while the high end reflects heavier doors, a pair, or added cable work. Here’s how the numbers tend to break down.
| Service | Typical estimated range |
|---|---|
| Spring repair, one torsion or extension spring | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Spring inspection or adjustment | Within the single-spring range |
What moves the price: door weight and size, the spring type (torsion vs. extension), whether you replace one spring or a pair, and whether cables or drums need attention at the same time. To avoid overpaying, get the written estimate before work starts and ask whether the price covers the pair or a single spring. A free estimate from us includes the inspection, a clear recommendation, and a written price. The written estimate sets the final price, so there are no surprises when the job is done. Call (833) 968-4997 for your free estimate.
Garage Door Spring Repair Near Lakewood – Our Service Area
We connect homeowners across Lakewood and the surrounding west-metro neighborhoods with local spring repair, including Wheat Ridge, Dakota Ridge, Golden, Englewood, Littleton, Arvada, and Columbine. If you’re nearby in Berkley or Four Square Mile, the pro can usually reach you the same day. For a focused look at a nearby area, see our garage door spring repair page for Wheat Ridge and our garage door spring repair page for Dakota Ridge. Wherever you are on the west side, we’ll book the closest available pro and confirm your window before the visit.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Lakewood
Garage door spring repair is the replacement, adjustment, or inspection of the springs that counterbalance your door’s weight so the opener doesn’t have to lift it alone. It covers torsion springs above the door, extension springs along the tracks, and the safety cables and hardware around them. Because springs are under heavy tension, this is a job for a trained technician rather than a do-it-yourself project. Our technicians have up to 14 years of experience with both spring types.
Most single-spring jobs take about an hour once the pro is on site, and a matched pair or added cable work takes a bit longer. The inspection and estimate come first, so the full visit usually runs a little over that. If the door needs extra parts, the pro will tell you before starting. Call (833) 968-4997 to book a time.
Garage door spring repair in Lakewood typically costs $180 – $340 for one spring, and a matched pair is usually replaced together, so a pair costs about twice that. Cable work, if needed, runs $130 – $250. The written estimate sets the final price and is agreed before any work starts. Call (833) 968-4997 for an exact quote – estimates are free.
Yes, we service LiftMaster and Chamberlain openers, including the myQ smart platforms, alongside the spring repair. When a spring fails, the opener often needs its force and travel settings reset to match the new springs, and that’s part of the job. We also work on Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Call (833) 968-4997 and tell us what you have.
Same-day service is often available for broken springs in Lakewood, since spring repair is a core job we handle daily. We work from 7am to 7pm for fast dispatch, and we’re closed on Saturdays; if your door fails on a Saturday, call and we’ll book you for Sunday. Call (833) 968-4997 and we’ll confirm the soonest available window.
The pro you’re connected with stands behind the work, and we’ll walk you through what’s covered on the parts and labor before you approve the estimate. Ask about the warranty terms when you book so you know exactly what’s included. Call (833) 968-4997 with any questions.
Clear the area under and around the door, and keep the door closed and the opener off until the pro arrives. Don’t try to lift a heavy door by hand or run the opener on a broken spring, because both can cause further damage or injury. If you can, have your door’s make and model handy. Call (833) 968-4997 to schedule.
Schedule Your Garage Door Spring Repair Service in Lakewood Today
A broken spring leaves your car stuck and your door unsafe to run, so don’t wait on it. Call (833) 968-4997 for a free estimate and same-day availability on spring repair in Lakewood, with the price quoted and agreed before any work starts. We connect you with a local pro who works on the brand you already own and gets your door back in working order. For the full range of what we handle, visit Garage Door Repair Lakewood Pros, and for the related work see our garage door spring repair overview.
Written by the team at Garage Door Repair Lakewood Pros.